We are independent & ad-supported. We may earn a commission for purchases made through our links.
Advertiser Disclosure
Our website is an independent, advertising-supported platform. We provide our content free of charge to our readers, and to keep it that way, we rely on revenue generated through advertisements and affiliate partnerships. This means that when you click on certain links on our site and make a purchase, we may earn a commission. Learn more.
How We Make Money
We sustain our operations through affiliate commissions and advertising. If you click on an affiliate link and make a purchase, we may receive a commission from the merchant at no additional cost to you. We also display advertisements on our website, which help generate revenue to support our work and keep our content free for readers. Our editorial team operates independently of our advertising and affiliate partnerships to ensure that our content remains unbiased and focused on providing you with the best information and recommendations based on thorough research and honest evaluations. To remain transparent, we’ve provided a list of our current affiliate partners here.
Construction

Our Promise to you

Founded in 2002, our company has been a trusted resource for readers seeking informative and engaging content. Our dedication to quality remains unwavering—and will never change. We follow a strict editorial policy, ensuring that our content is authored by highly qualified professionals and edited by subject matter experts. This guarantees that everything we publish is objective, accurate, and trustworthy.

Over the years, we've refined our approach to cover a wide range of topics, providing readers with reliable and practical advice to enhance their knowledge and skills. That's why millions of readers turn to us each year. Join us in celebrating the joy of learning, guided by standards you can trust.

What is a Construction Joint?

By Emma G.
Updated: May 17, 2024
Views: 18,603
Share

When laying cement or concrete, a builder sometimes cannot lay the entire slab all at once. Weather, time constraints, or lack of materials might stop the project midway. When this happens, the builder needs to leave an even stopping place, called a construction joint. This joint is basically a straight line in the concrete. If done correctly, a construction joint can double as a contraction joint, a joint placed in the concrete to prevent cracking of the slab.

The edge of a construction joint is created using a bulkhead. Bulkheads can be made of various materials, from plastic to steel to preformed concrete. During the pouring and leveling process, bulkheads can double as screed rails. Concrete is poured between screed rails, the tops of which are then used as a guide when leveling the concrete. Normally, bulkheads and screed rails are removed after the slab is complete.

The design of a construction joint depends on the load the concrete is expected to bear. For foot traffic or small vehicle traffic, a simple butt joint is easiest. A butt joint consists of two slabs of concrete laid a few millimeters apart and delineated by bulkheads. If heavy vehicle traffic is expected, the construction joint should be reinforced with a load transfer device.

Load transfer devices prevent the cement slabs from shifting under heavy loads. Shifting can cause uneven slabs and breakdown in the joints. Dowels, load plates, or slots can be embedded into the concrete to act as load transfer devices. These devices are laid perpendicular to the construction joint, extending into both slabs across the joint. Their purpose is to distribute the load evenly between slabs.

In many cases, construction joints can double as contraction joints. As cement dries, it shrinks, which results in cracking. Though cracking is almost impossible to prevent, it can be controlled. Uncontrolled cracking can cause an uneven surface, which is subject to increased wear over time and water seepage, which can damage the substrate. Contraction joints are inserted into slabs to guide cracks along a predetermined line.

Contraction joints can be formed by cutting a groove in the slab or by embedding plastic strips into the slab. The purpose of the joint is to weaken the slab along the approved line so that the slab cracks there instead of somewhere else. In order to be effective, the contraction joint must be at least one quarter as deep as the slab is thick.

Share
About Mechanics is dedicated to providing accurate and trustworthy information. We carefully select reputable sources and employ a rigorous fact-checking process to maintain the highest standards. To learn more about our commitment to accuracy, read our editorial process.
Discussion Comments
Share
https://www.aboutmechanics.com/what-is-a-construction-joint.htm
Copy this link
About Mechanics, in your inbox

Our latest articles, guides, and more, delivered daily.

About Mechanics, in your inbox

Our latest articles, guides, and more, delivered daily.