We are independent & ad-supported. We may earn a commission for purchases made through our links.
Advertiser Disclosure
Our website is an independent, advertising-supported platform. We provide our content free of charge to our readers, and to keep it that way, we rely on revenue generated through advertisements and affiliate partnerships. This means that when you click on certain links on our site and make a purchase, we may earn a commission. Learn more.
How We Make Money
We sustain our operations through affiliate commissions and advertising. If you click on an affiliate link and make a purchase, we may receive a commission from the merchant at no additional cost to you. We also display advertisements on our website, which help generate revenue to support our work and keep our content free for readers. Our editorial team operates independently of our advertising and affiliate partnerships to ensure that our content remains unbiased and focused on providing you with the best information and recommendations based on thorough research and honest evaluations. To remain transparent, we’ve provided a list of our current affiliate partners here.
Electrical

Our Promise to you

Founded in 2002, our company has been a trusted resource for readers seeking informative and engaging content. Our dedication to quality remains unwavering—and will never change. We follow a strict editorial policy, ensuring that our content is authored by highly qualified professionals and edited by subject matter experts. This guarantees that everything we publish is objective, accurate, and trustworthy.

Over the years, we've refined our approach to cover a wide range of topics, providing readers with reliable and practical advice to enhance their knowledge and skills. That's why millions of readers turn to us each year. Join us in celebrating the joy of learning, guided by standards you can trust.

What is Capacitive Coupling?

By Christy Bieber
Updated: May 17, 2024
Views: 28,772
Share

Capacitive coupling is referred to in electronics as the transfer of a common energy to different devices linked together through an electrical network. The transfer of energy is done by using different capacitors between circuits. It may also be done in sequence to the original power signal that is intended for coupling.

In an analog circuit, the purpose of capacitive coupling is to interrupt a DC circuit, which is why the capacitor used is referred to as a DC-blocking capacitor. In digital circuits, capacitive coupling is most often used in different types of communications devices as a way to block any chance of interference with a signal or to avoid the formation of any type of voltage or power imbalance. These imbalances are often associated with signal amplifiers, especially when the input and output leads couple, which causes what users might hear as feedback.

Capacitive coupling can also occur unintentionally, when a circuit has a frequency running through it and another wire is close in proximity. In such cases, the powered wire may couple with the wire that is projecting bandwidth or frequency and either intercept or simply interfere with the signal of the original wire. The opposite can also occur, wherein the powered wire interferes with the frequency, causing noise or interference with the incoming signal being processed.

When the capacitive coupling occurs on an unintentional basis, usually because two wires powered at different bandwidths or voltages are too close to each other, an unwanted effect called electrical noise occurs. This noise may manifest in either signal interruption of the product’s incoming or outgoing signal or background noises such as high-pitched hissing. Alternatively, the product may simply not work the way it was originally intended. When this occurs in the manufacturing process, most product manufacturers correct the problem by either separating the wires in the wiring schematic or by creating a nonconductive wall between the two wires.

When a coupling effect is desired in an electrical bandwidth device, however, the two wires that would typically be separated are placed within a close proximity of each other. It may also be planned in the schematic that the two wires wind around each other to create the environment where the highest amount of coupling is desired. When the coupling effect is desired between both digital or analog circuits, they are coupled together through the use of capacitors that function separately, depending on whether the signal being powered is digital or analog.

Share
About Mechanics is dedicated to providing accurate and trustworthy information. We carefully select reputable sources and employ a rigorous fact-checking process to maintain the highest standards. To learn more about our commitment to accuracy, read our editorial process.
Discussion Comments
By hamje32 — On Jul 21, 2011

The article was very illuminating. I’ve had audio equipment like microphones hooked up to my video equipment, and with other wires nearby, I’ve experienced hissing and background noise like the article says.

I knew that this was interference of some sort but didn’t know that it was capacitor related.

By MrMoody — On Jul 20, 2011

@miriam98 - I can’t say much about wind and solar. The little that I know about capacitors comes from the wonderful world of automotive audio equipment.

I installed audio equipment and had to hook up to a power capacitor. This capacitor stores the electricity from the battery, and let me tell you, it charges very quickly.

I imagine that a bunch of these strung together in a coupled fashion would form a bank and could store more charge. I don’t know how long the charges last, though, either individually or coupled together. I’m sure there are formulas for figuring that stuff out.

By miriam98 — On Jul 20, 2011

@allenJo - That’s informative. I’ve never looked into the details of what the survivalists need to keep themselves going, besides solar panels, but I guess it would make sense that you would need some kind of a charging system for that kind of an arrangement.

I wonder if that’s the way that windmills store electricity too. That so far is the biggest hurdle, from what I understand, to widespread adoption of solar and wind power – the question of how to store the energy.

I had always heard that batteries were used but I didn’t know much more than that, or how long the batteries would last on their charge.

By allenJo — On Jul 19, 2011

Sometimes when I surf the Internet I come across these websites of survivalists who dream of “living off the grid.”

What they mean is that they want to generate their own energy, grow their own food, capture sunlight, be completely self-sustaining.

I don’t know if it’s really doom and gloom that they fear, or just the thought of being totally independent that truly motivates them.

However, after reading this article I am reminded of one arsenal in the survivalist’s toolkit. The capacitor bank is basically a bunch of capacitors coupled together.

It has the ability to store a lot of energy in a way that a single capacitor could not. If you were capturing energy through solar power or wind, you could store it in a capacitor bank so that when the sun isn’t shining and the wind isn’t blowing, you’d still have power.

That’s one application of this technology I suppose that would be very useful.

Share
https://www.aboutmechanics.com/what-is-capacitive-coupling.htm
Copy this link
About Mechanics, in your inbox

Our latest articles, guides, and more, delivered daily.

About Mechanics, in your inbox

Our latest articles, guides, and more, delivered daily.